Showing posts with label manifestation. Show all posts
Showing posts with label manifestation. Show all posts

CN milled catapult

Ever since seeing this little 3D-printed catapult, i knew i had to build a better one. so i designed a bigger and more powerfull one in aluminium.


i used Fusion 360's adaptive clearing to remove the bulk of material, then fiunished of the pieces with contouring rounds.


Here, the parts are laid out for the assembly:



The spring assembly was constructed by layers of 1mm plywood, later knitted around, so that they are still able to slide, but not separate


Of course, i had to use a 3D-printed wrench to assemble it:


The arm was riveted to the main axle:


And here it is, in all it's glory besides the smaller 3D- printed catapult, and the printer who printed the small one.



Milling boxes in fixtures



As Koka Nikoladze had the need to machine some holes in some electronic enclosures, we produced some jigs to repetedly mounting and machining of these boxes.


For Bernt Isak's project, The Cosmos, we made a similar jig, also for cutting out por't for the Arduino's interface.





3D milling aluminium and stainless steel

This weekend i held courses in Fusion 360 at Bitraf. We started of with a course aimed for people without any 3D modelling experience on friday, then went trough some of the more advanced functions on saturday, before moving on to the CAM function and 3D printing on sunday.

On saturday i lectured about assembly in fusion, and the difference between bodies and components, and how to structure the file when building an assembly with moving parts. The case for this weekend was this machinist vise, as we then could use the model when we were milling on sunday.



After modelling the vise, we modelled a test case, 60x60x100 with some random topografy for testing out Fusion CAM's adaptive clearing. As we now had a 3D model of the vise, we could now easly activate collision detection, aswell as grabbing the necesary geometry for mounting the vise to our machine.


As this weekends goal was to experiment with 3D milling, we also tried some different finishing strategies. For aluminium, what worked best where a 6mm singleflute ballmill. Above is a rendered image of the vice, with the finishing toolpath projected on to it using gimp.


The machining process leaves a mess, but since i where using adaptive clearing, it's a uniform mess. All the chips are uniform, since the tool cut the material with a constant load.
I did several tests with different stepdown and stepover. For each test, i let one side be finished, while the other side still had the surface from the roughing pass.


I also machined a 50x50x50 block of stainless steel, this was the result:



This is the toolpath for the steel block. The model was produced by warping a hexagon along an the center axis. As the material was stainless steel, the stepdown was kept low at 0.2mm, but the feedrate high at 1600 mm/min.



The three samples sitting at my desk after a long weekend. i have now aquired the knowledge needed for producing my first injection mold.


Progressing with the screwdriver case

Here is the latest progression on the screwdriver set. Now that i had made one functional prototype of the drawer, the time had come to produce five of the new improved versions.





After generating toolpaths, the parts where milled from plywood and aluminium. The plywood parts where to be milled from both sides, so three wooden dowels where used to ensure that the material lined up from both sides.





Then, once i had five aluminium frames, and five wooden trays, i had to begin drilling the holes for the small brass screws that hold the frame in place. As much as i enjoy operating the CNC machines, there are something special about forming material by hand. Therefore, grabbed my toolbox, and began the process of marking, drilling and countersinking the holes.


After ensuring that the screws did infact fit in the aluminium frames, i mounted the frames to the wood. Using one of my favourite tools, a brass hammer i made my self some time ago, i hammered the frames onto the wooden trays.

Then using another of my selfmade tools, the small parallel clamp, i secured the two pieces together while i predrilled the hole for the screws. Then, i mounted the piece on a small board with a welding clamp, and inserted the threee screws.


As i had not used Bitrafs lasercutter for quite a while, i decided to produce a temporary rack to store the drawers in when i am not working on them. After some thinking, i came up with a quick design in Fusion 360. I took roughly half an hour to cut.


Thats it for now, the next thing i will have to do to finish this project, is to lasercut the wooden inserts for the aluminium frames. Then i will need to cut the final wood cabinet in wich the drawers will sit.

Wooden case for wrench

As i have been working hard the last week, i needed to take some time off, and relax my own projects. So, today i made a wooden case for one of my most used tools, the wrench to change the tools in oour CNC machine.

First, i began scetching an concept, in Autodesk Fusion 360.


Then, the cutting commenced:



After Some sanding and oiling, i assembled the case, glued on the velvet, and suddently, i had this sitting on my desk:



This was a fun quick project, all together, it took less than three hours.

Pulsejet sled update

Finaly got the time to do some welding on the Pulsejet powered sled. i added the reinforcement bars at the back, and prepared the aluminium bracket for welding. The jet sled is currently being exhibited at NDC oslo 2016 together with my hexapod.




Hexapod

Just testing the limit on how many components you can include in a 3D preview from Autodesk 360. Quite a few apearently. The explode view function is intresting.


oven made from a trashcan!


Our casting oven is now operational! 

Made from a trashcan, it is not pretty, but is does wok very well!

Milling steel on the shopbot

The OCD tingler! As we were doing some exeriments with cutting steel on the shopbot, we made this:

A binary dice made of steel, with some brass gears put inside before welded shut. The dice measures 50 x 50 x 50, and weighs in at 320 G. We cut the steel with casemaker pattern at 10mm/sek with a three flute 6mm bit, 1,5 mm at each pass.

The pieces where welded together at 50 amp with our TIG welder.





PP plastic

I milled som PP plastic with the shopbot today, ran a 6mm singleflute at 18000 RPM 35mm/sek with 8mm pass depth.
The chip formation was good, and the surface quality turned out great!

Antenna for drone

Made the mounting ring for this antenna for a client today, as we milled it from a soft alloy of aluminium, we churned this out at 12mm/sek 4mm cut depth with a 6mm bit.


Making A wax seal

Christina lewis came up with the idea of making her logo into a wax seal. Challenge accepted! So today, i milled the logo itself from a block of aluminium, going slow at 6mm/sek with a 2mm singleflute bit @ 18000 RPM, the handle will be made later from some wood.

we started out with a simplified vector file, wich we then made toolpaths from in Vcarve, the program which writes code to the CNC machine.



The machining process is loud, and draws attention!


The finnished seal:


The end result:






Wrenches

Tired of the cheap looking steel wrences that came with the shopbot?

Just download these awesome tools!

DXF, SVG, STEP and STL files for this project is downloadable for free through this thingiverse site.

You can download the Fusion files Including toolpaths through the 3D preview by clicing on the autodesk logo in the left lower corner. The toolpaths is currently not up to date, some of them is also missing.



















Aluminium milling on the shopbot

There is a lot of misunderstanding out there regarding milling aluminium on CNC routers. i am sharing todays work with some data on feedrates and cutters that you can use as a baseline for doing similar work in your labs. The parts shown is for a ongoing work, my hexapod robot.

The first cut! as you see, these are quite deep pockets. when roughing out areas like these, the key is to always have a good chipload. meaning, that instead of going to slow and just rubbing the metal, go deep and remove it!

Here i took a cut of 7mm, removing 4mm the first pass, then 3,5, before the finishing pass where the last 0,5mm millimeter was removed. all this using a feedrate of 8mm/sek, with a singleflute 6mm carbide bit.
I maxed out the spindle at 18K rpm.

when you buy your bit, buy a upcut! A compression bit will leave good finish on wood, giving a smooth finish with out fraying. on aluminium however, the key is to evacuate the chips as fast as possible. an ucput bit will do just that, dragging the chips out of the cut.

A downcut will do the opposite, it will compress it it down in the cut you are leaving. Wile this works for the first pass, the cutter will break in the next, when you mill over all that compressed swarf.

Do you think you need to buy those expensive german made tools? No. they will last longer, they will give a better finish, but you will do just fine with cheap ebay tools when practicing.

On the long run however, the german and american made carbide tools are the more economic choice, as they can be ran at much higher feedrates, doing the job quicker.

A good tool will also leave a better finish, so that less work is left to do manualy. all the feeds and speeds i post are done with carbide mills. if you buy HSS tooling, i advise you to slow down a little.


This is a huge area that needed to be faced. when doing facing, you should be a bit agressive, so the chips are thrown away, so you dont mill over the chips you just cut loose. in my case, the vacuum system on the CNC mill was wery helpfull.

Here the deapth of cut where kept low at 2mm/sek, but at a higer feedrate of 15, which is realy pushing it when milling hard alloys like this.

Also, see the tiny holes? when drillling deliate features like this, activate peck drilling in vcarve.

This commands the shopbot to only go engage a certain depth of cut at once, then retreat to safeZ.

the depth it will use is set usingPassdepth at the cutter settings. this will break the chips, and avoid clogging the drillbit at the bottom of deep holes.
peck driling also reduces the chance of breaking delicate bit. in my case, the bit measured 2.1mm.

when dealing with tougher materials as aluminium, it is important to secure parts that will fall off, be cut loose or otherwise risk to be dragged into the cutting bit. not only would such an incident break an expensive bit, but can also cause serious injury as the cutter will often exceed speeds of 10K RPM.
when adding such screws, it is advised to make these holes in the vcarve file itself, so that you have specific controll over their position relative to other ares that will be cut.
If you drill these holdown holes by hand, the CNC will not be aware of their position, and may very well crash into them.



can you notice the stepped edge on the part being cut out?

when making deep cuts, you may clog the cutting bit, or risk welding the chips back onto the part itself. to avoid this, make an offset Pocket when making the first pass.

On the next pass, the cutter will not rub the previous edge, reducing workload, chatter and leaving room for clearing the chips. then, in the finnishing pass, make the cut at zero offset, so that you get a nice, shiny edge.

i have found that using climb cutting on both roughing and finishing, leaving 0,5-0,15mm is enough to achive a good finish, as leaving to little will result in rubbing, and a bad finish

For the finishing cut, a feedrate from 4-10 has given me sucsess, depending on the diameter of the cutter. as i mainly make small precise parts, i usualy use a 3mm upcut with one flute for finishing.


The freshly cut upper plate, with circuitboard and other parts mounted. When fitment of other components are determined, the plate will be removed, and the backside machined in a jig cut for the purpose.
I did not bother to do anything about the surface of the aluminium, but if you want to remove the pattern from the machining, a sanding pad with 800+ grid will do it in a few seconds.


This is the underside. for the servos to fit, i had to take a finnishing cut with the 3mm bit. The reason was that the 6mm bit left an excess radius, not alowing the servo to fully slide in. for this operation, i used the following data:

18000 RPM

1,5mm passdepth

5mm/s for feedrate

with a

single flute upcut 3mm carbide bit.

in comparison to the 3mm depth @10mm/sek with the 6mm bit, this went quite slow.

for other tools, you could use as a rule of thumb with pass depth: that you have 50% of the cutter diameter as max, meaning a 5mm bit would yield good results with 2,5mm as pass deapth.


The chips sould be quite rough and sharp. if they are tiny and flaky, or just like powder, you are not cutting agressively enough. That will wear your cutting tool down faster than using the right settings.
remember that milling will always create heat. you don't want that heat to stay in neither the cuttingbit or the material, you want to throw it away With the chips.
To be able to crete such large chips, it is importatant that you use a single or doube flute tool. As having more flutes increase the amount of material removed, you must also increase the feedrate, or lower the RPM to keep the amount of removed material constant.


The aftermath. These will be used to cast the other components of the hexapod. 

replicating viking jewelry

This piece were found hundreds of years ago, but made long before that, in year 900. The piece were digitized using a 3D scanner. The scan where then split in rhino, and the respective sides where then milled in wax, and fitting boxes for the sand mold where made.

The first step of a sand cast is to make the sand fine, you want no lumps in your mold! Here Jens Dyvik from Fellesverkstedet is preparing the mold.


This is one of the sides of the mold, together with the tools we will use to pack it with sand.


We left the tabs from the milling process of the mold frames, so that the sand will hold the mold better.


The first layer of sand is the most critical, so we powder the sand realy fine to catch all the details.


The sand must be packet realy hard. The blunt end of a hammer works just fine.


The two sides of a sand mold, complete with inlett and air wents.
for registration, we use 6mm dowels, normaly used in carpentry. We use a triangle pattern for registration, so there is no option to mount the molds together wrong.


Once the molds where ready, it was time to prepeare the metal, in this case salvaged from old harddrive cases.



We used the electric furnace to the rigth to heat the metal to 700 degres celcius.








here the metal has been poured. the sand contains quite a bit of oil to make it hold the pattern. This oil lets of some nasty fumes, so we use our fume extractor until the part has cooled, and is ready to be removed from the mould.





This is the part straigth out of the mold:





This clip shows me revealing the cast piece:



jon Nordby noticed that the dents left in the surface of the cast, coresponded with these dark marks in the sand. We beieve these are made by gas trapped in the mold, and that the issue can be corrected by making more went holes.



The finnished piece. Now, the process will be repeated, with silver instead of aluminium, to complete the job.






animaliordinari Proudly Powered by Blogger