we started out with a simplified vector file, wich we then made toolpaths from in Vcarve, the program which writes code to the CNC machine.
The machining process is loud, and draws attention!
The finnished seal:
The end result:
Making A wax seal
Christina lewis came up with the idea of making her logo into a wax seal. Challenge accepted! So today, i milled the logo itself from a block of aluminium, going slow at 6mm/sek with a 2mm singleflute bit @ 18000 RPM, the handle will be made later from some wood.
we started out with a simplified vector file, wich we then made toolpaths from in Vcarve, the program which writes code to the CNC machine.
we started out with a simplified vector file, wich we then made toolpaths from in Vcarve, the program which writes code to the CNC machine.